OpenBCM V1.13 (Linux)

Packet Radio Mailbox

DB0FHN

[JN59NK Nuernberg]

 Login: GUEST





  
CX2SA  > SATDIG   25.06.05 14:05l 168 Lines 4625 Bytes #999 (0) @ WW
BID : 518_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #759 1/1
Path: DB0FHN<DB0FOR<DB0SIF<DB0EA<DB0RES<DK0WUE<7M3TJZ<PY1AYH<CX2SA
Sent: 050625/1256Z @:CX2SA.LAV.URY.SA #:518 [Minas] FBB7.00e $:518_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To  : SATDIG@WW


AMSAT-BB-digest       Saturday, June 25 2005       Volume 2004 : Number 759



In this issue:

1: Re: [amsat-bb] AlfaSpid Az/El users
2: [amsat-bb] AO-51 and vo-52 into ITUNE.CFG for InstantTrak
3: [amsat-bb] AO-51 mode S

----------------------------------------------------------------------

Message: 1
Date: Fri, 24 Jun 2005 21:35:08 -0400
From: "Luc Leblanc VE2DWE" <luclebla@sorel-tracy.qc.ca>
Subject: Re: [amsat-bb] AlfaSpid Az/El users

On 24 Jun 2005 at 16:20, Daniel Kekez wrote:

My answers in the text Daniel
> Hi All,
>
> I am wondering if there is anyone on the BB who is using the
AlfaSpid
> Az/El rotator. To those people, I have two questions:
>
> 1. What software are you using to control the rotator? How have you
> configured the software?

I'm using orbitron with alfa-spid own DDE control program that you
can get free on orbitron web site at:http://www.stoff.pl/



>
> 2. How are you feeding your power and control cables to the
rotator, and
> weather proofing it?  The cables from the motors go to screw
terminals
> behind a plate, but I am concerned about water getting into this
cavity
> and causing a short. How have you dealt with this?


I'm using a standard 8 conductors rotor wire with the two conductors
of bigger size for the motor. I attached a standard trailer plug
connector to the rotor terminals post and after closing the terminal
post cover i sealed the top portion with silicon. don't sealed the
bottom part to allow moisture drainage.

My web site is overdue for updating if a can get some time i will
refresh it but i can send pictures of my installation if this can
help you.

Orbitron '"i think" is the only one program who have alfa-spid
included in his compatibility list. I run it numerous time and he's
working fine.

I have the azimuthal rotor and i cannot answer about the elevation
rotor but it seems to be the same type of connectors.

>
> Thank you in advance for your help.
>
> 73,
>
> -Daniel, VA3KKZ
> ----
> Sent via amsat-bb@amsat.org. Opinions expressed are those of the
author.
> Not an AMSAT member? Join now to support the amateur satellite
program!
> To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
>
>


"-"
"That a democracy can't do certain things if in fact its citizens
don't support it"
Lieutenant general James Conway June 16 2005.

Luc Leblanc VE2DWE
Coordonnateur AMSAT Quebec coordonnator
AMSAT 33583
www.qsl.net/ve2dwe
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

------------------------------

Message: 2
Date: Fri, 24 Jun 2005 22:12:04 -0400
From: Charles R Reiche <charlieray@optonline.net>
Subject: [amsat-bb] AO-51 and vo-52 into ITUNE.CFG for InstantTrak

I am wondering if someone could help me with the entries for ITUNE.CFG for
Instant track for AO-51 and VO-52
Hopfully you have settings for the sband downconverted to 144 Mhz

Thanks for any help.
Charles N3CRT
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

------------------------------

Message: 3
Date: Fri, 24 Jun 2005 23:13:26 -0500
From: "Aruni" <ve4wmk@mts.net>
Subject: [amsat-bb] AO-51 mode S

Hi to the BB...

Had lots of fun for the first time working AO-51 on mode S tonight at 02:54
UTC pass.

Many thanks for the following contacts.

N5UXT
K4OZS
KC8ZFN
KK0SD

Also heard N4AC throughout the pass calling CQ. Called him several times but
couldn't hear him back.

Signals sounded great with the following setup.

Uplink:
Icom IC-W32A at 5 watts, Arrow 2m antenna.

Downlink:
Homebrew 4 turns helical antenna, AIDC 3731 downconverter, Homebrew power
inserter, Icom IC-W32A.

Hope to work again this fun mode on AO-51 at field day.

73,

Aruni Perera, VE4WMK
Kumara Perera, VE4WKP

AMSAT members: #35560  #35559
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org

------------------------------

End of AMSAT-BB-digest V2004 #759
*********************************


----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the authors.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb-digest" to Majordomo@amsat.org


Read previous mail | Read next mail


 16.11.2026 07:45:05lGo back Go up