| |
CX2SA > SATDIG 24.06.05 16:26l 150 Lines 5405 Bytes #999 (0) @ WW
BID : 132_CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #757 1/1
Path: DB0FHN<DB0RGB<OK0PPL<DB0RES<DK0WUE<7M3TJZ<HG8LXL<CX2SA
Sent: 050624/1515Z @:CX2SA.LAV.URY.SA #:132 [Minas] FBB7.00e $:132_CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
AMSAT-BB-digest Friday, June 24 2005 Volume 2004 : Number 757
In this issue:
1: [amsat-bb] SatPC32 S/W & IC-970H
2: [amsat-bb] Nasa.Dat file
3: Re: [amsat-bb] field day 6 contacts I hope
4: Re: [amsat-bb] Nasa.Dat file
----------------------------------------------------------------------
Message: 1
Date: Thu, 23 Jun 2005 22:54:41 -0400
From: "Woody" <kj4so@nc.rr.com>
Subject: [amsat-bb] SatPC32 S/W & IC-970H
(Referring to SatPC32 S/W John wrote:
"Be careful with the 970H. I could never get it to function properly with
either program. Might not be a problem with the software, just my
inabilities. I operated thru the birds for a couple of years with a 970H,
manually adjusting the downlink vfo, and allowing the program to steer the
antennas. Many others operate the birds in a similar manner. Maybe others on
the reflector can help you with the setup for the 970H".
I have an IC-970H and I was planning on purchasing SatPC32 to use for Doppler
correction and antenna control with a Yaesu 5400. I would really appreciate
hearing from others who are either successfully using SatPC32 with an IC-970,
or who experienced problems with this combination.
Thanks & 73,
Woody
KJ4SO
AMSAT # 5562
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 2
Date: Thu, 23 Jun 2005 23:29:41 -0400
From: sco@sco-inc.com
Subject: [amsat-bb] Nasa.Dat file
Uni_Trac 2003 does not want to read my NASA.DAT file of keps from Nova.
Les
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 3
Date: Thu, 23 Jun 2005 23:16:15 -0500
From: "George Henry" <ka3hsw@earthlink.net>
Subject: Re: [amsat-bb] field day 6 contacts I hope
Well, I sure would like to be able to make 20+ Field Day satellite QSO's
like we used to when AO-13 was still up there............ gotta love those
HEO birds! Anyway, if I am going to go thru all the effort of dragging my
gear to Field Day, I sure expect to make more than just 6 contacts!!! I'll
probably limit myself to one Q per FM bird (depends on how jammed the
overnight passes are), but the SSB birds are fair game.
George, KA3HSW
- ----- Original Message -----
From: <n4qwf@ntelos.net>
To: <amsat-bb@amsat.org>
Sent: Thursday, June 23, 2005 11:17 AM
Subject: [amsat-bb] field day 6 contacts I hope
> The Lynchburg Amateur Radio Club will again this year operate our field
> day station. Along with the normal 2A we will run the satellite station.
> We will use the club call of K4CQ. Please listen for us on all the birds.
> Our intent is the try for one contact on each bird and then stop so others
> can have as much chance as possible. How much does the next 10 or 20
> points mean anyway? I would perfer 6 contacts on 6 sats to calling CQ on
> top of 100 others doing the same. Lets all get our 6 and let it go at
> that. Thanks << John
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 4
Date: Fri, 24 Jun 2005 00:54:39 -0400
From: sco@sco-inc.com
Subject: Re: [amsat-bb] Nasa.Dat file
If this is the case can I call my keps file in NOVA: uni_trac.txt instead
of Nasa.dat? I use Nova for updating my keps. I want to continue using Nova
to display and track the satellites too. I only need an interface device to
work with nova.
Les
At 12:33 AM 6/24/2005, you wrote:
>The file name must be "uni_trac.txt" like it says is the default in the
>manual -- even if you change it in the Main Configuration. Its VERY
>particular about Keps -- you can copy the "nasa.dat" file into the
>uni_trac folder and rename it. However, you will need to run the update
>program within Uni_Trac once every thirty days or it will give you a
>warning message that your Keps are more then 30 days old even if you have
>a brand new set --
>its pretty strange.
>
>73 Tom n0ntx
>
>----- Original Message ----- From: <sco@sco-inc.com>
>To: <amsat-bb@amsat.org>
>Sent: Thursday, June 23, 2005 9:29 PM
>Subject: [amsat-bb] Nasa.Dat file
>
>
>>Uni_Trac 2003 does not want to read my NASA.DAT file of keps from Nova.
>>
>>Les
>>----
>>Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
>>Not an AMSAT member? Join now to support the amateur satellite program!
>>To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
End of AMSAT-BB-digest V2004 #757
*********************************
----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the authors.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb-digest" to Majordomo@amsat.org
Read previous mail | Read next mail
| |