| |
CX2SA > SATDIG 21.06.05 18:05l 162 Lines 5523 Bytes #999 (0) @ WW
BID : 64522-CX2SA
Read: GUEST
Subj: AMSAT-BB-digest V2004 #751 5/6
Path: DB0FHN<DB0MRW<DB0RGB<OK0PPL<DB0RES<DK0WUE<7M3TJZ<PY1AYH<CX2SA
Sent: 050621/1652Z @:CX2SA.LAV.URY.SA #:64522 [Minas] FBB7.00e $:64522-CX2SA
From: CX2SA@CX2SA.LAV.URY.SA
To : SATDIG@WW
Message: 13
Date: Mon, 20 Jun 2005 11:44:24 -0500
From: k5gna@houston.rr.com
Subject: [amsat-bb] Downconverter With Corner Reflector -- corrected
FROM K5GNA:
My original message was formated wrong and missing some info (too many
characters in a paragraph), plus one of the downconverters with the 2
meter IF was sold since -- here is a more readable copy:
I had enough parts for 3 more downconverters with corner reflectors --
one 2 Meter IF units (2401 MHz = 145 MHz) and two 122 MHz IF units (2401
MHz =123 MHz). These are already packaged (most ordered the ncluded 3
items) and ready to ship for field day. I can ship today, otherwise I
will be gone the rest of the week.
PayPal.com or BidPay.com is the only way I can do it in time for Field
Day -- they should be there by Thursday. Contact me at k5gna@aol.com
This Road Runner Email address will delay response.
EVERYTHING IS SHIPPED VIA US POSTAL SERVICE PRIORITY MAIL WITH INSURANCE
AND THE PRICE INCLUDES SHIPPING.
DOWNCONVERTERS WITH CORNER REFLECTOR -- THESE ARE THE SAME UNITS AS
DREW'S, AS PICTURED ON PAGE 85 OF JULY QST. Items are packed and complete
as listed, subject to prior sale.
2.4 GHz, AIDC 3731 downconverter with dipole @ $135, 2 meter IF, F to
BNC adapter and with the small corner reflector with 12 dBi gain and ball
swivel mount hardware. You will need a couple of F to F jumper cables as
used on TV's. Power inserter for downconverter @ $10. This will inject
the DC into the downconverter so it can be powered up the coax, has 3
female F connectors. I will also include a wall wart power supply at no
charge, but you must solder on an F connector for power to the power
inserter -- I don't have any complete power supplies. You can connect it
directly to a 12 volt battery also. If your RX sends preamp power up the
coax, it will power the downconverter and the inserter is not needed. 6
dB Attenuator @ $3, to reduce excess noise and help prevent accidental
burnout of the downconverter. These will not pass DC, so can't be used
with the preamp PS in t! he RX. These will work with the power inserter.
2 METER IF (2401 MHz = 145 MHz). TOTAL = $148.00, 1 unit available.
SAME AS ABOVE BUT WITH ORIGINAL 122 MHz IF (2401 MHz =123 MHz). TOTAL =
$123.00, 2 units available.
Please respond to: k5gna@aol.com
TNX,
Bob
K5GNA
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 14
Date: Mon, 20 Jun 2005 15:34:08 -0700 (PDT)
From: CHUCK <kd6v@sbcglobal.net>
Subject: [amsat-bb] BBQ GRILL
I have for sale a never used K5GNA fully screend BBQ
grill with hardware for the DC.
I am asking $30.00 OBO from zip 95121.
I can provide a picture if one is desired.
Chuck,
Amsat 33815.
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 15
Date: Mon, 20 Jun 2005 17:33:24 -0400
From: "Woody" <kj4so@nc.rr.com>
Subject: Re: [amsat-bb] RE: S band for 6 bucks
Hi All:
Robin, KE7ARL has sent the crystal from his Cal Amp 130215 S-band
downconverter to International Crystal Manufacturing (ICM) for testing
and manufacturing of an 8.8125 MHz replacement crystal. This will move
the IF frequency to 144 MHz. for an input freq. of 2.4 GHz. 2401 MHz.
will down convert to 145 MHz.
Once ICM measures the parameters of the original crystal they will
produce an ICM catalog number and specs for the new crystal. Once I get
the information I will post it to the website and here on the BBS.
http://www.themidwives.org/CalAmp/
Based on my phone call to ICM, the crystal will cost around $20 each and
have a 4 week lead time.
73,
Woody
KJ4SO
AMSAT # 5562
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 16
Date: Mon, 20 Jun 2005 21:11:18 -0400
From: "John Henderson N4NAB" <jah@ec.rr.com>
Subject: [amsat-bb] Palm Pilot Tracking Program
Can anyone recommend a palm tracking program?
73, John
N4NAB/ FM14lq
AMSAT # 32411
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
------------------------------
Message: 17
Date: Tue, 21 Jun 2005 02:55:11 +0000
From: w4epi@COMCAST.NET
Subject: [amsat-bb] 2006 Slate of BOD Candidates
Nominations for the position of Director for AMSAT, Inc. closed on June 15th.
The list of qualified candidates are:
Barry Baines WD4ASW
Emily Clark W0EEC
Richard M. Hambly W2GPS
Bob McGwier N4HY
Gunther Meisse W8GSM
Bruce Paige KK5DO
Lee McLamb KU4OS
Greg Wycoff N0ZHE
Ballot cards will be mailed to members on or about July 15th, and are due
in the AMSAT Office no later than September 15th.
Regards,
Steve Diggs, W4EPI
Corporate Secretary
- ----
Sent via amsat-bb@amsat.org. Opinions expressed are those of the author.
Not an AMSAT member? Join now to support the amateur satellite program!
To unsubscribe, send "unsubscribe amsat-bb" to Majordomo@amsat.org
Read previous mail | Read next mail
| |