| |
PA2WIV > AGW 20.06.07 14:39l 34 Lines 606 Bytes #999 (0) @ WW
BID : 2442_PA2WIV
Read: GUEST
Subj: Re: Printer port oddity
Path: DB0FHN<DB0FOR<DB0MRW<DB0HOT<DB0ERF<DB0FBB<DB0IUZ<DB0OVN<DB0PRA<DB0ACH<
DB0PKE<DB0SM<DB0NDR<PI8AWT<PI8CDR
Sent: 070620/1233Z @:PI8CDR.#DRE.NLD.EU #:597 [Beilen] $:2442_PA2WIV
From: PA2WIV@PI8CDR.#DRE.NLD.EU
To : AGW@WW
# Generated by: TstHWin v2.21b - Registered to PA2WIV
# On : 20-06-2007 14:31:46
# UTC: 20-06-2007 12:31:46
>G0FTD wrote:-
>>
>> I've just been putting together a simple AGW PTT interface.
>>
>> On my 25 pin printer port I've used Pin 2 (Data 0) and Pin 25 (ground).
>>
>> I can see a permanent 5v on it - why ?
>
Used with PAR96 (Baycom) modem:
2=data
3=PTT
4=burst
10=clk/16
12=rec.data
13=dcd(opt.)
18-25=gnd
But why not use COM-port? diagram is in the AGW docs, parts can be mounted
in the plug.
Vy 73 Tinus PA2WIV@PI8CDR
e-mail alias at: veron.nl
Read previous mail | Read next mail
| |
