| |
ZL1AJG > PACKET 16.04.05 10:26l 67 Lines 1664 Bytes #999 (0) @ WW
BID : 411185ZL1AJG
Read: GUEST
Subj: Re: Baycom TNC
Path: DB0FHN<DB0MRW<OK0PKL<DB0GRL<SR6BBA<SR7DWL<SR1BSZ<SP7MGD<RZ6HXA<ER3KAZ<
DB0RES<ON0AR<ZL2BAU<ZL1UX
Sent: 050416/0109Z @:ZL1UX.#20.NZL.OC #:35648 [Hamilton] FBB7.00i $:411185ZL1AJ
From: ZL1AJG@ZL1UX.#20.NZL.OC
To : PACKET@WW
>
>
> Greetings to all
>
> I am running my packet station through my sound card and now would like to
> setup my Baycom insted of my sound card/
>
> I have used the SV2AGW help file and still it does not work, it comes up
> with a illegal operation.
>
> Can anybody assist me
>
> Thanx
>
>
> 73's
>
> Willem Prinsloo - ZR5ZS
> ZR5ZS @ ZR5S
Hi Willem,
Tnis should not be a problem. Do you have the correct patch cable for you
rig? If all these connecting cables are correct, them you will need to
reset the properties within AGW.
Click on the tower icon in the systray, and select properties from the
menu. Ensure that you have the correct port set up; if not, then delete
and create new port press OK. Select port from dropdown menu (com 2 in my
case). Select baudrate. (1200), then select your TNC type from the list.
YOU WILL HAVE NEEDED TO HAVE INSTALLED THE DRIVERS FILE INTO THE AGW
DIRECTORY! Select KISS Simple from the list, and press options button,
to view the comport Hex address & IRQ (com 1 = 3f8,4; com 2 = 2f8,3)
Under the tab TNC commands, select "program adjusts parameters"
then "OK", and restart program. It SHOULD accept it and run...
Hope this helps.
73 - Allen, ZL1AJG @ ZL1UX
Message timed: 13:05 on 16 Apr 05
Message sent using WinPack-AGW V6.80
AMD K6-2/350, W98se, AGW-PE, Baycom modem, IC-2A, Digitor 30w amp.
>/ex
73 de Allen, Cambridge, N..Z. RF72RC
ZL1AJG @ ZL1UX
allengilbert@clear.net.nz
X:
Message timed: 13:05 on 16 Apr 05, using WinPack-AGW V6.80,
AMD K6-2/350, W98se, AGW-PE, Baycom modem, IC-2A, Digitor 30w amp.
Read previous mail | Read next mail
| |
