| |
GW1SXN > SIX 28.05.01 23:37l 49 Lines 1435 Bytes #999 (0) @ WW
BID : 1732_GB7ABB
Read: GUEST
Subj: WHAT MAKE IS MY 5EL 6M BEAM ???
Path: DB0AAB<DB0FSG<I4UKI<IK6RUY<IK6PYS<HB9OK<HA3PG<WB7AWL<GB7DIP<GB7NLW<
GB7WLR<GB7BOB<GB7OAR<GB7PMB<GB7BAY<GB7ABB
Sent: 010528/1131Z @:GB7ABB.#55.GBR.EU #:1732 [Caernarfon] FBB7.00g23 $:1732_GB
From: GW1SXN@GB7ABB.#55.GBR.EU
To : SIX@WW
HI ALL . I have been given a broken 6m Beam, but i have no idea of the
maker... The description of it is ...
D1 = 8FT 5
D2 = 8FT 6
D3 = 8FT 7
Driven Elelement = 9ft 1
Reflector = 8ft 8
error Relector should read 9ft 8
the gaps between elements are 2 x 33.5cm and 2 x 35cms but i do not know
which gap is for what element ???
So can you please tell me what the gap is for D1 ? D2 ? D3
is it 33.5 or 35 cms,
OH Yes each of the elements can be ajusted at each end for length
by sliding the 18in end tip in or out.
but as there is a small hole in the the sliding part i assume that it
the default makers setting..
where a small screw will keep the ajustable tip in place .
I have managed to replace the very rusty element nut and bolts
and the square boom connenting bolts..
oh yes i forgot to tell you the size of the boom it's 11ft 8
So i am wondering if i could have a Sandpiper or Moonraker
or what ever...
The only thing broken is the brass/copper GAMMA match.
i do not know how it made contact with the rear of the so239 socket
does the L shaped end of the gamma match have a thinner short pin
to insert into rear of the 239 ? if thats the case than mine does NOT
have a short thin pin end.
#
or if not as above how then does it make a connection.
maybe i have something missing from the rear of the socket ?
73's Patrick GW1SXN @ GB7ABB
EMAIL gw1sxn@psilink.co.uk
Read previous mail | Read next mail
| |
