Hamradio

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

**Requirements:**
  * PC/Flexnet32 installed on your System (see Section DB0FHN Category Services for examples)
  * at least Windows 2000
  * Terminalprogram using PC/Flexnet32 installed on your System (e.g. Paxon)

**Service:**
  * Nodesoftware for automatic hamradio stations

**Limitations:**
  * none

**Summary:**
  * no summary

First download {{:projects:igate:flxnod32.dll|flxnod32.dll}} into your Flexnet directory. Close your PC/Flexnet32-Controlcenter with Tools -> Shutdown FlexNet (if it is running).

Now start a new Consolebox with "Start -> Run -> cmd -> OK". Change into your PC/Flexnet32 directory and type "flexkrnl -install".

{{:projects:igate:flexinst.png|:igate:flexinst.png}}

Close your Consolebox and start your favourite terminal program. Connect FLXNET on PC/Flexnetchannel "FlexNet Digi" and set your nodecall (e.g. DB0NGN) and SSID-range with "mycall db0ngn 0 15". Disconnect FLXNET.

{{:projects:igate:flexcall.png|:projects:igate:flexcall.png}}

Open Menu Tools -> Parameter in FlexNet Control Center and doubleclick channel 15 to set a password with at least 10 characters.

{{:projects:igate:flexpass.png|:projects:igate:flexpass.png}}

Now configure all your channels with the FlexNet Control Center. Connect your node and set your links as you know from PC/Flexnet16 Digiversion.

If you have installed the IPOVER-Adapter for TCP/IP over AX25 you have to set a link on port 15 to your "Callsign for IP" with linkparameter @.

Hamradio

User Tools

Site Tools

Page Tools